Gaming Tools2026-05-10

Apex Legends to CS2 Sensitivity Converter

Converting from Apex Legends to CS2 is a common transition for players looking to compete in the world's most established tactical FPS ecosystem. CS2's fixed 0.022 yaw makes the target conversion straightforward once you know your Apex cm/360. The key is accounting for Apex's FOV-dependent sensitivity when calculating your starting cm/360.

compare_arrows

Apex to CS2 Sensitivity Converter

Free · No registration

Try this tool for free →open_in_new

Step-by-Step Guide

1

Note Apex sensitivity, DPI, and FOV

Record your Apex Mouse Sensitivity from Settings → Mouse/Keyboard. Note your current Apex FOV (Settings → Video → FOV slider). Check your DPI. Enter all three into the converter — the FOV is critical because Apex sensitivity values produce different cm/360 at different FOV settings.

2

Apply the CS2 output

Enter the CS2 sensitivity output in CS2 Settings → Mouse. Verify in a workshop map using the tape method. CS2 also accepts decimal values with up to 3 decimal places — enter the exact converter output without rounding.

3

Adapt to CS2 movement rules

CS2's accuracy system requires you to stand completely still or counter-strafe before shooting accurately. Apex's movement-while-shooting mechanics don't apply in CS2. The most critical CS2 skill to develop: tap the opposite direction key momentarily before shooting to instantly stop your momentum. This is not a sensitivity issue but a movement skill that underlies all effective CS2 play.

Tips & Best Practices

check_circle

CS2's tight corner geometry rewards 0-movement crosshair placement at specific pixel-accurate angles — use workshop aim maps to learn the most contested positions.

check_circle

Apex's tracking practice translates to CS2 in pistol round and AWP duels where tracking moving opponents matters.

check_circle

CS2's economy system means some rounds will use inferior weapons — sensitivity that works for AK also needs to work for pistols and SMGs.

Frequently Asked Questions

At 104 FOV: CS2_sens ≈ Apex_sens × 0.146. At 90 FOV: CS2_sens ≈ Apex_sens × 0.126. Example: Apex 2.5 at 104 FOV, 800 DPI → CS2 ≈ 0.365 sensitivity at 800 DPI.

Apex to CS2 sensitivity conversion is direct and reliable. Match your cm/360, adapt to CS2's movement-accuracy rules, and your Apex-developed tracking fundamentals give you a genuine advantage in CS2's pistol rounds and close-range engagements.

Try this tool for free →open_in_new